Troubleshooting
10-29
10
4 Lift up reverse unit.
5 Remove the jammed original.
If the original tears, remove every loose scrap from
inside the machine.
6 Put reverse unit back in its original place and close
the document processor top cover.
7 Reload the originals on the document processor
tray.
Optional Document Finisher
If a misfeed occurs in the optional document finisher, refer to the respective Operation Guides to clear the jam.
Optional Job Separator
Follow the steps below to clear paper jams in the optional job separator.
1 If jammed paper is seen through the paper ejection
slot of the job separator, pull it toward your side to
remove it.
If the paper tears, remove every loose scrap from
inside the machine.
To Next Page
Loading...
Need help?
General
