Default Setting (System Menu)
8-44
Adjustment/Maintenance
Adjust printing quality and conduct machine maintenance.
• Copy Density Adjustment …8-44
• Send/Box Density Adjust …8-45
• Drum Refresh …8-45
• Correcting Fine Black Lines …8-46
• System Initialization …8-46
• Display Brightness …8-46
• Silent Mode …8-47
• Auto Color Correction...8-47
• Color Registration...8-47
• Color Calibration Cycle...8-50
• Gray Adjustment...8-51
• Color Calibration...8-52
• Developer Refresh...8-53
• Laser Scanner Cleaning...8-53
• MP Tray Cleaning...8-53
• First Print Position...8-54
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Copy Density Adjustment
Adjust copy density. Adjustment can be made in 7 levels both in auto and manual density modes.
Use the procedure below to adjust the copy density.
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance] and then [Next] of Copy Density Adjustment.
3 Press [Change] of Auto or of Manual.
4 Press [-3] - [+3] (Lighter-Darker) to adjust density.
5 Press [OK].
To Next Page
Loading...
