Default Setting (System Menu)
8-28
Use the procedure below to specify the action performed for Auto Paper Selection.
1 Press the System Menu key.
2 Press [Copy] and [Change] of Auto Paper Selection.
3 Press [Most Suitable Size] or [Same as Original Size].
4 Press [OK].
5 Move to the copy screen and press the Reset key.
Auto % Priority
When a paper source of different size from the original is selected, select whether automatic zoom (reduce/
zoom) is performed. The table below shows the available settings.
Use the procedure below to specify the automatic zoom priority.
1 Press the System Menu key.
2 Press [Copy] and [Change] of Auto % Priority.
3 Select the default for [Off] or [On].
4 Press [OK].
5 Move to the copy screen and press the Reset key.
Reserve Next Priority
Select the operation of the reserve copy and interrupt copy functions and for canceling jobs.
Use the procedure below to select the default Reserve Next Priority setting.
1 Press the System Menu key.
2 Press [Copy] and [Change] of Reserve Next Priority.
3 Select the default for [Off] or [On].
4 Press [OK].
Item Description
Off No zoom performed (copied in original size).
On Automatic zoom performed as appropriate.
To Next Page
Loading...
Need help?
General
