Utax CDC 1730 - Color Type

Default Setting (System Menu)
8-31
8
Use the procedure below to set the destination check before send.
1 Press the System Menu key.
2 Press [Send] and then [Change] of Dest. Check before Send.
3 Select [Off] or [On].
4 Press [OK].
Color Type
Set the color type when you send color documents. The table below shows the available settings.
Selecting RGB displays the color profile values set on the machine.
Use the procedure below to set the color type.
1 Press the System Menu key.
2 Press [Send] and then [Change] of Color Type.
3 Select [RGB] or [sRGB].
4 Press [OK].
Entry Check for New Destination
When adding new destination, display the entry check screen to check the entered destination. The table below
shows the available settings.
NOTE: This setting is available with 55/50 ppm model.
Use the procedure below to set the destination check before send.
1 Press the System Menu key.
2 Press [Send] and then [Change] of Entry Check for New Dest.
3 Select [Off] or [On].
4 Press [OK].
Item Description
RGB Send color documents in RGB.
sRGB Allows you to match the color space for machines that support sRGB.
Item Description
Off Do not display the entry check screen.
On Display the entry check screen.