Basic Operation
3-28
For send to folder (FTP)
5 Upon completion of all entries, press [Connection
Test] to check the connection.
NOTE: Connected. appears when connection to the
destination is correctly established. If Cannot connect.
appears, review the entry.
To specify another destination, go to the step 6. To
specify only one destination, go to step 7.
6 Press [Next Dest.] and repeat steps 3 to 5 to
specify the destination. You can specify a
combined total of up to 10 FTP and SMB
destination folders.
NOTE: When [Add to Addr Book] is displayed, the
entry is registered in the Address Book.
7
Press [OK] to register the entry in the destination
list.
Item Data to be entered
Max.
characters
Host Name* Host name or IP address of FTP server Up to 70
characters
Path Path to the receiving folder.
For example, \User\ScanData.
Otherwise the data will be saved in the home directory.
Up to 128
characters
Login User Name FTP server login user name Up to 64
characters
Login Password FTP server login password Up to 64
characters
* To specify a port number different from the default (21), enter using the format “host name:
port number” (e.g., FTPhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
To Next Page
Loading...
Need help?
General
