Utax CDC 1730 - Page 99

Basic Operation
3-27
3
3 Enter host name, path, login user name and login
password. Press the key of each item to first
display the entry screen.
4 Enter the destination data and press [OK].
Data to be entered are as follows.
NOTE: You will be unable to send the data if you forget your login user name or login password. Contact your
administrator and check your login user name or login password.
For send to folder (SMB)
Status
08/08/2009 10:10
Connection
Test
Host Name
Path
Login
User Name
Login
Password
SMB
FTP
Folder Path Entry
Place original.
Ready to send.
Destination
Cancel OKNext Dest.Add to Addr Book
Specify the folder on the destination
computer.
Status
10/10/2008 10:10
Use the keyboard to enter.
Backspace
Upper-case
Lower-case
No./Symbol Space
Cancel OK
Lower-case
!@#$%^&* ( ) _+˜
QWE R T Y U I O P { }
ASDFGHJKL : "
ZXCVBNM<>?
|
Input: characters
Limit: characters
0
128
Item Data to be entered
Max.
characters
Host Name* Host name or IP address of the PC to receive the data. Up to 70
characters
Path Path to the receiving folder such as follows.
For example, \User\ScanData.
Up to 128
characters
Login User Name User name to access the PC
For example, abcdnet\james.smith
Up to 64
characters
Login Password Password to access the PC Up to 64
characters
* To specify a port number different from the default (139), enter using the format “host name:
port number” (e.g., SMBhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)