Document Box
6-9
6
7 To copy or move the document to a custom box,
select the destination box.
To copy the document to USB memory, select the
destination folder and press [Next]. If necessary,
set the saved file size and the file format, etc.
8 Press [Move] or [Copy] and then press [Yes] in the
confirmation screen. The selected document is
moved or copied.
NOTE: If the box to which the document is to be
moved or copied is protected by a password, enter the
correct password.
Joining Documents
The procedure for joining documents in a custom box is explained below.
NOTE: You can only join a document to other documents in the same custom box. If necessary, move the
documents to be joined beforehand.
1 Press the Document Box key.
2 Press [Custom Box], select the box containing the
documents you want to join and press [Open].
NOTE: If a custom box is protected by a password,
enter the correct password.
3 Select the documents in the list that you wish to join
by pressing the checkbox.
The document is marked with a checkmark.
You can join up to 10 documents.
NOTE: To deselect, press the checkbox again and
remove the checkmark.
4 Press [Join].
Move
Move to Custom Box
Status 08/08/2009 10:10
Job Box.
Select the destination box and press [Move].
BackCancel
20001 Document1 Administrator
50004 Document4 Administrator
30003 Document3 Administrator
30002 Document2 Administrator
Used AreaNo. Name Owner
Open
Up
MB
MB
MB
MB
Document
To Next Page
Loading...
Need help?
General
