Default Setting (System Menu)
8-23
8
EcoPrint
Select the EcoPrint default. The table below shows the available settings.
NOTE: Refer to page 4-12 for EcoPrint.
Use the procedure below to set the default EcoPrint setting.
1 Press the System Menu key.
2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] twice, and then [Change] of EcoPrint.
3 Select [Off] or [On] for the default.
4 Press [OK].
PDF/TIFF/JPEG Image
Select the default PDF/TIFF/JPEG file quality. Five options are available from 1 Low Quality (High Comp.) to 5
High Quality (Low Comp.).
NOTE: Higher quality will make the stored files larger.
Refer to page 5-12 for file formats.
Use the procedure below to select the default file quality setting.
1 Press the System Menu key.
2 Press [Common Settings], [ ] and [Next] of Function Defaults. Press [ ] twice and then [Change] of PDF/
TIFF/JPEG Image.
3 Select the default image quality from [1] (Low Quality) to [5] (High Quality).
4 Press [OK].
Item Description
Off No EcoPrint performed.
On EcoPrint performed.
To Next Page
Loading...
Need help?
General
