Management
11-5
11
Adding a User
This adds a new user. You can add Up to 1,000 users (including the default login user name). The table below
explains the user information to be registered.
NOTE: By default, one of each default user with machine administrator rights and administrator privileges is
already stored. Each user's properties are:
Machine Administrator
User Name: DeviceAdmin
Login User Name: 25/25 ppm model : 2500, 30/30 ppm model : 3000, 40/40 ppm model : 4000,
50/40 ppm model : 5000, 55/50 ppm model : 5500
Login Password: 25/25 ppm model : 2500, 30/30 ppm model : 3000, 40/40 ppm model : 4000,
50/40 ppm model : 5000, 55/50 ppm model : 5500
Access Level: Machine Administrator
Administrator
User Name: Admin
Login User Name: Admin
Login Password: Admin
Access Level: Administrator
It is recommended to periodically change the user name, login user name and login password regularly for your
security.
Use the procedure below to register a new user.
1 Login as a user with administrator rights.
2 Press the System Menu key.
3 Press [User Login/Job Accounting].
4 If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
Item Description
User Name*
* Mandatory at user registration.
Enter the name displayed on the user list (up to 32 characters).
Login User Name* Enter the login user name to login (up to 64 characters). The
same login user name cannot be registered.
Login Password* Enter the password to login (up to 64 characters).
Access Level* Select Administrator or User for user access privileges.
Account Name Add an account where the user belongs. The user, who
registered his/her account name, can login without entering the
account ID. Refer to Job Accounting on page 11-14.
E-mail Address The user can register his/her E-mail address. The registered
address will be automatically selected for subsequent operations
that need any E-mail function.