Management
11-24
4 Press [Next] of Job Accounting Setting and then
[Next] of Total Job Accounting.
5 Press [Check] at the function to check the count.
The results will be displayed.
6 Confirm the count and press [Close].
7 Press [Execute] of Counter Reset to reset the
counter.
8 Press [Yes] on the screen to confirm the reset. The
counter is reset.
Each Job Accounting/Resetting the Counter
This counts the number of pages for each account and resets the counts by account.
Use the procedure below to display and reset the counter.
1 Press the System Menu key.
2 Press [User Login/Job Accounting].
3 If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4 Press [Next] of Job Accounting Setting and [Check]
of Each Job Accounting.
5 Select the account to check the count.
NOTE: Select [Name] or [ID] from the Sort pull-down
menu to sort the account names.
Press [Search(Name)] or [Search(ID)] to search by
account name or account ID.
6 Press [Detail].
To Next Page
Loading...
