UTC Fire and Security FenwalNET 8000-ML User Manual

Configuration and Programming
P/N 06-237041-001 3-25 February 2011
21 Set Periods. Change the Day/Night Periods for Smoke Detectors.
Purpose: To change daytime and nighttime periods for smoke detectors.
22 Activate. Activate Day/Night Alarm Thresholds for Smoke Detectors.
Purpose: To activate daytime and nighttime alarm thresholds for smoke detectors.
23 Nighttime Settings at Night. De-Activate Day/Night Alarm Thresholds for Smoke Detectors
Purpose: To de-activate daytime and nighttime alarm thresholds for smoke detectors.
24 Change Owner Password.
Purpose: To change the owner's password from its current setting. The factory-default setting is
973480.
25 Change Installer Password.
Purpose: To change the installer’s password from its current setting. The factory-default setting is
186591.

UTC Fire and Security FenwalNET 8000-ML Specifications

General

Brand	UTC Fire and Security
Model	FenwalNET 8000-ML
Category	Control Unit
Language	English