UTC Fire and Security FenwalNET 8000-ML - Page 124

Configuration and Programming
February 2011 3-24 P/N 06-237041-001
Figure 3-23. FenwalNET 8000-ML Set Menu Functions (Cont’d - Fig. 7 of 14)
FOOTNOTES (Figure 3-23):
19 Set Day/Night/Weekend Mode. Activate Day/Night Operation for SmartOne Smoke Detectors.
Purpose: To enable one or more SmartOne smoke detectors to automatically adjust alarm
thresholds by time of day.
20 Set Day/Night/Weekend Mode. De-Activate Day/Night Operation for SmartOne Smoke
Detectors.
Purpose: To disable one or more SmartOne smoke detectors from automatically adjusting alarm
thresholds by time of day.
3. SET
2. Passwords
4. Programming
1. Day/Night
Set Day / Night / Weekend Mode
SLC Devices From*__ to __
 (1-255)
Cont’d
*
1. Set Detectors 
Day / Night / Weekend Mode
1. Activate 2. De-Activate *

Set Day Period (Now 8:00)
Day Period Start *_:__ (24 hour clock)

2. Set Periods 
Set Day End (Now 8:00)
Day Period End *_:__ (24 hour clock)

3. Activate 
Change Password
Enter New Password *_______

1. Owner 
Change Password
Enter New Password ********** __

Confirm New Password *_______ 
2. Installer’s 
Change Password
Enter New Password *_______

Change Password
Enter New Password **********__

Confirm New Password *_______ 
*= Level-2 (Installer) Password required .
19, 20
21
22
24
25
SLC Module Selection
Enter SLC Module Number (1-8):_*
SLC Module Selection
Enter SLC Module Number (1-8):_*
Nighttime Settings at Night
1. Activate 2. De-Activate *

Nighttime Settings on Weekend
1. Activate 2. De-Activate *

22, 23
SLC Module Selection
Enter SLC Module Number (1-8):_*