UVITEC Cambridge FIREREADER MAX - Page 204

UVITEC – Cambridge
204/225
Serial exposure set-up
The serial exposure has 4 different modes:
- Incremental
- Accumulation
- Repetitive
- Programmed
Incremental serial mode Accumulation serial mode
Repetitive serial mode Programmed serial mode
The incremental mode
In the incremental mode, you define the exposure time of the first image of the series, then the time
to be added to this increment for each subsequent image:
Example:
Image
1
20second is the First exposure time
Image
2
+ =
The increment time is 10s.
Image B has the exposure time of the previous image (20s) plus the increment time (10s).
Image 2 is the result of the addition of image 1 plus Image B.
20s
30s -Image B Image 2
20s