11
English
LUNA 2.0 AI USER MANUAL
1 .6 Water contacts
The water contacts allow the LUNA 2.0 AI to automatically turn on the moment it senses the presence of water.
This means that you can jump in the water at any time without having to worry whether the computer is turned
on or not. The water contacts can be found near the top left and right corners of the display, as pointed out in the
image below.
F
NOTE: When replacing the protection foil on the LUNA 2.0 AI’s display, take care not to cover the water
contacts!
If the dive is not started within 5 minutes of activating the water contacts, the LUNA 2.0 AI will automatically switch
off again.
To Next Page
Loading...
Need help?
General
