Uwatec LUNA 2.0 AI User Manual

24
LUNA 2.0 AI USER MANUAL
2.2.1.1 Setting UTC
The UTC setting will change the displayed time compared to Greenwich 0-Meridian. This feature is practical
when traveling through different time zones. By long-pressing the right button you may edit the hours with the
pushbuttons in a range of +14h to -13h. By long-pressing the right button you conrm the hours, and the minutes
will be highlighted. The minutes can be edited in 15-minute increments.
2.2.1.2 Setting the time
By entering the Set Time submenu, the time setting will be activated. You may change the hours and the minutes
using the pushbuttons.
F
NOTE: The seconds cannot be edited, they always start counting from 0.
2.2.1.3 Setting the date
By entering the Set Date submenu, the rst two digits will be highlighted. You may edit them using the pushbuttons.
Change the selection to the next two digits by long-pressing the right button. Finally, set the year and conrm the
settings. In 24h time format the rst digits in the date are days, in AM/PM time format the month is rst.

Uwatec LUNA 2.0 AI Specifications

General

Brand	Uwatec
Model	LUNA 2.0 AI
Category	Diving Instrument
Language	English