32
LUNA 2.0 AI USER MANUAL
F
NOTE: In this screen the MOD is also displayed and will adjust automatically depending on your O
2
and
PPO
2
max settings.
F
NOTE: Gas 1 cannot be disabled.
Setting Gas 2
Enter the submenu Set Gas 2 and select ON by long-pressing the right button, then adjust the O
2
content of your
tank from 21% to 100%.
F
NOTE: Gas 2 can be disabled by selecting OFF in the menu.
F
NOTE: Gas 3 can be set or disabled the same way as Gas 2.
F
NOTE: The icon in the gas settings menu shows you that the respective tank is paired with a transmitter.
In the above screens Gas 1 is paired but Gas 2 is not paired.
If the PMG setting is disabled (see chapter Enabling predictive multi-gas mode (PMG)) the submenus Set Gas
2 and Set Gas 3 are not available. Then the menu Gas Mix will appear as follows:
To Next Page
Loading...
Need help?
General
