48
LUNA 2.0 AI USER MANUAL
Maximum and average depth Timer
F
NOTE: In Gauge and Scuba mode when the timer is displayed, it can be paused by a long-press of the right
button. A repeated long-press of the right button will restart the timer. The timer can be reset to zero by a long-
press of the left button.
3 .6 Diving in APNEA mode
The LUNA 2.0 AI measures the depth in APNEA mode every 0.25 seconds to ensure the precise maximum depth.
In the logbook the data is saved in 1-second intervals. In APNEA mode it is also possible to start and stop the dive
manually with a long-press of the left button. This way you can use the LUNA 2.0 AI for static Apnea dives, where
a normal dive start depth of 0.8 meters will not start a new dive.
If the APNEA mode is triggered manually by selecting St. Apnea in the Dive->Apnea menu, before the rst
immersion the LUNA 2.0 AI will show the surface interval counting in the middle of the display.
Upon immersion the screen will show the dive time of the current immersion.
With the left or right pushbuttons you can switch to different screens where information like the total apnea exercise
time, date and current time, skin temperature and heart rate in beats per minute will be displayed. The current
temperature (water or air) is always displayed in the bottom left area of the display.
To Next Page
Loading...
Need help?
General
