13
English
LUNA 2.0 AI USER MANUAL
2 . LUNA 2.0 AI SETTINGS AND MENUS ON THE SURFACE
In this chapter, the surface settings are described. These settings will allow you to personalize your LUNA 2.0 AI
as desired.
The menu structure of the LUNA 2.0 AI is arranged as seen in the below chart:
Time & Date
Water
Decoalgo
MB-Level
or
G Factor
PDIS
Scuba
PMG
Mode
Scuba
Gauge
Apnea
Altimeter
Planner
Logbook
Bluetooth
Gas
Gas Mix
Set Gas 1
Set Gas 2 Set Gas 3
PPO2max
PPO2max 1
PPO2max 2 PPO2max 3
Apnea
Total Ex
SIF
Depth
Dive Inc
Dive Int
Surf Int
Low HR
Speed
St. Apnea
Dive Time
Depth
MOD
Light
Warning
Set UTC
Set Time
Set Date
Format
Clock
Buzzer
Sound
Button
Workload
Light- up
Light
Units
Owner
D-HR belt
Settings
User
Desat
Service
Dive
Time & Date
In each menu the current selection will be highlighted (black text on white background) and will stay in the middle
of the screen as you scroll up or down.
Selecting “RETURN” in a menu or submenu has the same function as a long-press of the left button; it will return
you to the previous menu or submenu or from the main menu to the surface screen.
F
NOTE: Depending on the selected decompression algorithm, the LUNA 2.0 AI will either display MB-level or
G Factor settings in the SCUBA submenu.
F
NOTE: The menus Workload and PDIS are only available if the adaptive decompression algorithm is selected.
2 .1 Dive settings on surface
In this menu you can set your dive-related preferences, like selecting dive mode, choosing the decompression
algorithm, or setting warnings and alarms.