39
English
LUNA 2.0 AI USER MANUAL
To set up a new dive plan, enter the Planner menu.
F
NOTE: When the LUNA 2.0 AI is in GAUGE or APNEA mode, the dive planner is disabled.
2 .6 .1 No-stop plan
If you have completed a dive but plan to make another during the desaturation phase, you must start the planner
by adding the time you would otherwise be on the surface. The time can be added in 15-minute increments.
The prohibited altitude class is shown after the current elevation at the bottom line. For more information on altitude
diving with the LUNA 2.0 AI, see chapter Altitude diving. In case the LUNA 2.0 AI is displaying the no-dive warning,
the duration of the warning itself is displayed as a recommended surface interval for planning purposes (rounded
up to the nearest 15-minute increment).
When the surface interval is given, or if you have no remaining desaturation left, the planner shows the depth in
3m/10ft increments and can be increased or decreased using the push-buttons. The no-decompression dive time
is shown for that depth. The current gas mix is shown on the bottom row.
CNS% value replaces the gas mix on the bottom left of the screen when 1% would be reached for that depth with
maximum no-stop time.
To Next Page
Loading...
Need help?
General
