EasyManuals Logo

Uwatec LUNA 2.0 AI User Manual

Uwatec LUNA 2.0 AI
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21
English
LUNA 2.0 AI USER MANUAL
2.1.3.8 Ascent speed alarm
In this menu you may enable or disable the the ascent speed alarm by choosing AUDIBLE or OFF. By selecting
AUDIBLE you can select the interval from 0.1 to 5.0 meters/second (1 to 15 feet/sec) in 0.1m/sec (1ft/sec)
increments.
2.1.3.9 Manually starting an Apnea dive (ST. APNEA)
Apnea exercise mode can be manually started from the Dive -> St. Apnea menu. The session starts with a surface
interval.
Display information and diving with this mode is described in chapter Diving in APNEA mode.
F
NOTE: Manually starting an apnea dive will automatically change the dive mode to Apnea.
2 .1 .4 Warning settings
There are four warnings which can be enabled and edited directly in the LUNA 2.0 AI. The rest of the warnings can
only be enabled / disabled via SCUBAPRO LogTRAK. To learn more about the warnings see chapter Alarms and
warnings during diving.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Uwatec LUNA 2.0 AI and is the answer not in the manual?

Uwatec LUNA 2.0 AI Specifications

General IconGeneral
BrandUwatec
ModelLUNA 2.0 AI
CategoryDiving Instrument
LanguageEnglish

Related product manuals