EasyManuals Logo

Uwatec LUNA 2.0 AI User Manual

Uwatec LUNA 2.0 AI
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
72
LUNA 2.0 AI USER MANUAL
indication displayed on your LUNA 2.0 AI’s screen.
Once the message “SAVE PAIRING” appears on your LUNA 2.0 AI’s display, confirm it by a long-press of the
right button.
4 .5 Bluetooth USB dongle
PCs and laptops with Bluetooth driver version lower than 4.0 require a generic Bluetooth dongle 4.0 or higher in
combination with Windows
®
operating system 8 or higher.
With older operating systems a BlueGiga type dongle is required.
5 . INTERFACES FOR THE LUNA 2.0 AI AND AN INTRODUCTION TO LOGTRAK
5 .1 Establishing Bluetooth communication
The LUNA 2.0 AI can be connected via Bluetooth to a desktop computer, laptop or handheld device for downloading
dive data, conguring dive computer settings, writing owner information, or uploading rmware updates.
From the main menu, toggle down to Bluetooth using the right button. Long-press the right button to initialize the
connection.
At this point the LUNA 2.0 AI is ready for Bluetooth communication. Bluetooth is active only when the below screen
is displayed.
To establish Bluetooth communication with another device, set the device you want your LUNA 2.0 AI to
communicate with (e.g. an iOS
®
or Android™ handheld device) to “scanning” mode. The rst time you do this will
require entering a pin code to ensure secure communication. This pin code is randomly generated by your LUNA
2.0 AI and is shown on its screen.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Uwatec LUNA 2.0 AI and is the answer not in the manual?

Uwatec LUNA 2.0 AI Specifications

General IconGeneral
BrandUwatec
ModelLUNA 2.0 AI
CategoryDiving Instrument
LanguageEnglish

Related product manuals