To Next Page

To Previous Page

English

LUNA 2.0 AI USER MANUAL

Once the code is accepted by the device you want to connect to, the link is ready for communication.

F

NOTE: The LUNA 2.0 AI has a timeout of 3 minutes for a non-active Bluetooth connection. After this interval,

the LUNA 2.0 AI will disable Bluetooth and return to the surface screen to save energy.

5 .2 SCUBAPRO LogTRAK

SCUBAPRO LogTRAK is an advanced tool for keeping track of your dives. It is available for desktop computers

(Windows

and Mac

) as well as for mobile devices (Android™ and iOS

5 .2 .1 SCUBAPRO LogTRAK desktop version

Download and install LogTRAK desktop version from www.scubapro.com/software-rmware. Consult the Read

First text le found in the download package for instructions on how to install.

To establish communication with a desktop computer:

1. Connect your LUNA 2.0 AI to your desktop computer as described in the chapter Establishing Bluetooth

communication

2. Launch LogTRAK on your desktop computer.

3. Check that the LUNA 2.0 AI is detected by LogTRAK in Extras -> Options -> Download.

4. If it is not automatically detected, run the “Rescan plugged device.”

The desktop version of LogTRAK offers the following main functions:

• Download dives.

• Import and export dive profiles.

• Access device information (ID, hardware, and software versions, etc.).

• Enable/disable warnings.

• Enter owner and emergency contact information.

Uwatec LUNA 2.0 AI User Manual

Questions and Answers: