26
LUNA 2.0 AI USER MANUAL
SCUBAPRO recommends using the workload and heart rate features on all dives, but especially when making
technical dives. When the dive goes as planned there is no effect on the decompression schedule. However,
when workload is high more decompression time will be required. The adaptive algorithm additionally incorporates
the water or skin temperature (only with the patented SCUBAPRO Digital Heart Rate Monitor) and microbubble
formation into the decompression calculation.
You can also select the workload to be measured from breathing by selecting the “respiratory” or a combination of
heart rate and breathing where both parameters are measured, and the higher or lower parameter is used by the
algorithm.
When heart rate is not selected as a workload parameter (WORKLOAD OFF), the heart rate values can still be
shown in the screen during diving. This can be selected at the lower eld where HR can be set to be ON or OFF.
To Next Page
Loading...
Need help?
General
