Vacon 100X series - Page 129

Parameters vacon • 126
Service support: find your nearest Vacon service center at www.vacon.com
6
Value ‘1’ selected for parameter P3.3.3.1:
According to how many of the inputs assigned for Preset frequency selections are active, you
can apply the Preset frequencies 1 to 3.
P3.3.3.10 P
RESET FREQ SEL0
P3.3.3.11 P
RESET FREQ SEL1
P3.3.3.12 P
RESET FREQ SEL2
Connect a digital input to these functions (see chapter 6.1.2) to be able to apply Preset frequen-
cies 1 to 7 (see Table 121 and pages 76, 80 and 125).
Table 122. Selection of preset frequencies; = input activated
Activated input Activated frequency
P3.3.3.12 P3.3.3.11 P3.3.3.10 Preset Freq 1
P3.3.3.12
P3.3.3.11 P3.3.3.10 Preset Freq 1
P3.3.3.12 P3.3.3.11 P3.3.3.10 Preset Freq 1
P3.3.3.12
P3.3.3.11 P3.3.3.10 Preset Freq 2
P3.3.3.12 P3.3.3.11 P3.3.3.10 Preset Freq 2
P3.3.3.12 P3.3.3.11 P3.3.3.10 Preset Freq 2
P3.3.3.12 P3.3.3.11 P3.3.3.10 Preset Freq 3