Vacon 100X series - Page 30

4
vacon • 27 User Interfaces
Figure 6. Changing control places
Accessing the control page
The
Control page is meant for easy operation and monitoring of the most essential values.
1. Anywhere in the menu structure, push the
FUNCT button.
2. Push the
Arrow up or the Arrow down button to select Control page and confirm with the
OK button.
3. The control page appears
If keypad control place and keypad reference are selected to be used you can set the
Key-
pad Reference
after having pressed the OK button. If other control places or reference val-
ues are used the display will show Frequency reference which is not editable. The other
values on the page are Multimonitoring values. You can choose which values appear here
for monitoring (for this procedure, see page 37).
Figure 7. Accessing Control page
Main Menu
Parameters
( 15 )

Diagnostics

STOP READY Keypad
ID: M1
( 7 )
Monitor

( 6 )
ID:
Choose action
STOP Ready Keypad
ID:1805
Local/Remote
Control page
Change direction
?
Remote
ID:
Local/Remote
STOP READY Keypad
ID:211
Remote
Local
Main Menu
Parameters
( 15 )

Diagnostics

STOP READY I/O
ID: M1
( 7 )
Monitor

( 6 )
FUNCT
OK
OK
9161.emf
Main Menu
Parameters
( 15 )

Diagnostics

STOP READY I/O
ID: M1
( 7 )
Monitor

( 6 )
ID:
Choose action
STOP Ready Keypad
ID:1805
Local/Remote
Control page
Change direction
STOP READY Keypad
( 6 )
Keypad Reference
0.00 Hz
Output Frequency
0.00Hz
Motor Current
0.00A
Motor Torque
0.00%
0.00%
Motor Power
ID:184
Keypad
0.00 Hz
Output Frequency
0.00Hz
Motor Current
0.00A
Motor Torque
0.00%
0.00%
Motor Power
STOP READY Keypad
( 6 )
ID:168
Keypad Reference
0.00 Hz
Output Frequency
0.00Hz
Motor Current
0.00A
Motor Torque
0.00%
0.00%
Motor Power
FUNCT
OK
OK
OK
9162.emf