Vacon 100X series - Page 46

4
vacon • 43 User Interfaces
4.3.5.2 Option board slots
The parameters of this group depend on the option board installed. If no option board is placed
in slots D or E, no parameters are visible.
As an option board is removed, info text 39
Device removed will appear on the display.
4.3.5.3
Programming of digital and analogue inputs
The programming of inputs in the Vacon 100X Solar Pump Application is very flexible. The
available inputs on the standard and optional I/O can be used for various functions according
to the operator's choice.
The available I/O can be expanded with optional boards to be inserted in board slots D and E.
More information about the installation of optional boards you will find in the Vacon 100 X In-
stallation manual.
4.3.5.4 Digital inputs
The applicable functions for digital inputs are arranged as parameters in parameter group
M3.5.1. The value given to the parameter is a reference to the digital input you choose to use
for the function. The list of functions that you can assign to the available digital inputs is pre-
sented on Digital Inputs group.
Example
Figure 15.
Table 16. Option board-related parameters
Menu Function Note
Slot D Settings Option board related settings.
Monitoring Monitor option board-related info.
Slot E Settings Option board related settings.
Monitoring Monitor option board-related info.
GRAPHICAL KEYPAD
Parameter name (= Function)
Parameter name (= Function)
Parameter value (= selected digital input)
Parameter value (= selected digital input)