3. Attach the mounting plate to the sensor support arm.
1 Spring lock washer B6 DIN127 A4 (2 pcs)
2 Hex screw M6×16 DIN912 A4 (2 pcs)
4. To level the sensor, use the spirit level on the sensor. Turn the leveling screws
accordingly, starting from the one nearest to the spirit level.
5. Secure the sensor tightly with the two hex screws. Make sure that the sensor maintains
its leveled position.
6. Connect the sensor cable.
AWS310/AWS310-SITE Installation Manual M211584EN-F
130
To Next Page
Loading...
