VALCO MELTON D4-E - Over Temperature Alarm

MM101 – D-4E HOT MELT UNIT 45
VALCO MELTON S.L.U. Pol. Ind. Agustinos C/G 34 3116 0 ORCOYEN, NAVARRA
TEL: +34 948 321580 Fax: +34 948 326584 melton@melton.es www.valcomelton.com
The Over Temperature
Alarm is relative to the
temperature setpoint of
each zone
The over temperature
alarm tolerance is the
number of degrees that
any zone can heat
above its temperature
setpoint before
triggering an over
temperature alarm.
If any zone goes into
Over Temperature
Alarm, the heaters of
the affected zone are
automatically shut off.
The over temperature
alarm tolerance range
is 9°F to 108°F (5°C to
60°C). The factory
default setting is 45°F
(25°C).
This parameter can be
accessed in Password
Level 2 or higher (see
Appendix A Password
Levels)
Over
Temperature
Alarm