VALCO MELTON D4-E - Peripherals and I;O Configuration; Peripherals and I;O Setup

MM101 – D-4E HOT MELT UNIT 53
VALCO MELTON S.L.U. Pol. Ind. Agustinos C/G 34 3116 0 ORCOYEN, NAVARRA
TEL: +34 948 321580 Fax: +34 948 326584 melton@melton.es www.valcomelton.com
Sub Menu Choices:
Input 1 Input 2 Output 1
Disabled Disabled Disabled
Setback Setback System Ready
Auto Setback Auto Setback Ready & Pump On
Heater On/Off Heater On/Off Alarm
Pump On/Off Pump On/Off
Peripherals are user
selectable inputs and
outputs that can be
triggered by a remote
signal. Inputs include
pump enable, heater
enable, and setback.
Outputs include alarms
and system ready signal.
See “Customer
Connections” in Section
4 - Installation for a
detailed description of
these features.
This parameter can be
accessed in Password
Level 3 or higher (see
Appendix A Password
Levels).
Peripherals