VALCO MELTON D4-E - Setback Temperature

MM101 – D-4E HOT MELT UNIT 49
VALCO MELTON S.L.U. Pol. Ind. Agustinos C/G 34 3116 0 ORCOYEN, NAVARRA
TEL: +34 948 321580 Fax: +34 948 326584 melton@melton.es www.valcomelton.com
The setback feature is
used to reduce the
temperatures of all
zones by a given
temperature differential
to allow the hot melt to
remain soft but not
molten during periods of
inactivity.
The setback temperature
differential is relative to
the temperature setpoint
of each zone.
The setback temperature
differential range is 45°F
to 342°F (25°C to
190°C). The default
factory setting is 90°F
(50°C).
This parameter can be
accessed in Password
Level 2 or higher (see
Appendix A Password
Levels)
Setback
Temperature
X2