VALCO MELTON D4-E - Automatic Setback Timeout

MM101 – D-4E HOT MELT UNIT 50
VALCO MELTON S.L.U. Pol. Ind. Agustinos C/G 34 3116 0 ORCOYEN, NAVARRA
TEL: +34 948 321580 Fax: +34 948 326584 melton@melton.es www.valcomelton.com
If the Automatic Setback
Timeout input is enabled
and the unit does not
see an external input
within the automatic
setback timeout period,
the unit will automatically
go into setback
The Automatic Setback
Timeout feature is used
only in conjunction with
the Automatic Setback
External Input. It is not
used in manual or
scheduled setback
modes.
The automatic setback
timeout range is 1
minute to 120 minutes.
The default factory
setting is 30 minutes.
This parameter can be
accessed in Password
Level 2 or higher (see
Appendix A Password
Levels).
Automatic
Setback
Timeout