MM101 – D-4E HOT MELT UNIT 46
VALCO MELTON S.L.U. Pol. Ind. Agustinos C/G 34 3116 0 ORCOYEN, NAVARRA
TEL: +34 948 321580 Fax: +34 948 326584 melton@melton.es www.valcomelton.com
The Under Temperature
Alarm is relative to the
temperature setpoint of
each zone
The under temperature
alarm tolerance is the
number of degrees that
any zone can cool below
its temperature setpoint
before triggering an
under temperature
alarm.
If any zone goes into
Under Temperature
Alarm, the heaters of the
affected zone will remain
on to compensate for the
drop in temperature.
The under temperature
alarm tolerance range is
9°F to 108°F (5°C to
60°C). The factory
default setting is 27°F
(15°C).
This parameter can be
accessed in Password
Level 2 or higher (see
Appendix A Password
Levels).
Under
Temperature
Alarm
To Next Page
Loading...
