VALCO MELTON D4-E - Automatic Pump Mode

MM101 – D-4E HOT MELT UNIT 48
VALCO MELTON S.L.U. Pol. Ind. Agustinos C/G 34 3116 0 ORCOYEN, NAVARRA
TEL: +34 948 321580 Fax: +34 948 326584 melton@melton.es www.valcomelton.com
When the Automatic
Pump Mode is on, the
pump will automatically
start when the system
reaches temperature
and the System Ready
LED illuminates.
When the Automatic
Pump Mode is off, the
pump can be turned on
and off by pressing the
Pump On/Off Button.
(The System Ready LED
must be illuminated for
the pump to operate.)
The factory default
setting is OFF.
This parameter can be
accessed in Password
Level 2 or higher (see
Appendix A Password
Levels).
Automatic
Pump Mode