Valtra 6100 User Manual

149
37. Autocontrol 5/5.2
370 24G
6250--8950
1. 9. 2002
Modell Code Page
D. Main program and parameter files tables of AC5 and AC5.2 ---control
units
Autocontrol 5
TABLE 1: Control unit part numbers and file names, versions 53 and 65. These parameter files and c heck codes are used in
Service and in Spare Parts. The program disk part no is 340 422 60.
For trac-
tors no.
Suitability tractor models Control unit
part no.
Program file-
name
3
)
Parameter file
name
3
)
Check
code 1
1
)
Check
code 2
2
)
--- ---
--- --- 333 730 10
Not prog-
rammed
Not programmed --- --- --- ---
---J38342
6250, 6350, 6550, 6650, 6850,
8050, 8150, 8450,8550, 8950
340 272 30 AC5V53.s 19 6250_8950_5365.txt 53 23 23 53
---J38342
8350 340 276 30 AC5V53.s 19 8350_5365.txt 53 33 33 53
J38343
---K41106
6250, 6350, 6550, 6650, 6850,
8050, 8150, 8450, 8550, 8950
341 573 30 AC5V65.s 19 6250_8950_5365.txt 65 23 23 65
J38343
---K41106
8350 341 574 30 AC5V65.s 19 8350_5365.txt 65 33 33 65
3
) The files can be copied into the control units which have number 333 73 010 and the ser. no. end is 00400 or greater.
CODE 1
CODE 2
1
) Checkcode1isvisibleinthePCdisplaybytyp-
ing command PROC_VER? (HYPERTERMINAL)
or by clicking “Version” (LOADER 1.5)
2
) Checkcode2isvisibleinthe
tractor display (in the test mode FII)
Autocontrol 5.2
TABLE 1: Control unit part numbers and file names, version 86. In Service, these parameter files and check codes are used
in Spare Parts and in production. The program disk part no is 344 046 20.
For trac-
tors no.
Suitability tractor models
Control unit
part no.
Program file-
name
3
)
Parameter file
name
3
)
Check
code 1
1
)
Check
code 2
2
)
-
333 730 20
333 730 30
Not program-
med
Not programmed --- ---
K41107--- 6250, 6350, 6550, 6650, 6850 344 038 20 AC5V86.s19 6250_6850_86.txt 86 17 17 86
K41107---
6250, 6350, 6550, 6650, 6850
+HiTrol
344 039 20 AC5V86.s19 6250_6850_HT_86.txt 86 27 27 86
K41107--- 6750 347 884 20 AC5V86.s19 6750_86.txt 86 67 67 86
K41107--- 8050, 8150
344 041 20 AC5V86.s19 8050_8150_86.txt 86 37 37 86
K41107--- 8350
344 043 20 AC5V86.s19 8350_86.txt 86 47 47 86
K41107--- 8450, 8550, 8950
344 044 20 AC5V86.s19 8450_8950_86.txt 86 57 57 86
K41107--- X100, X110, X120
344 038 20 AC5V86.s19 X100_X120_86.txt 86 17 17 86
3
) The files can be copied into the control units which have number 333 73 020 or 333 73 030.
AC5: 340 42 260
AC5.2: 344 04 620

Valtra 6100 Specifications

General

Brand	Valtra
Model	6100
Category	Tractor
Language	English