13 7
Interruption of power supply
If the vehicle battery is flat, the selector
lever cannot be moved out of position P.
If the battery is flat, start the vehicle using
jump leads – see pag e 176.
If the battery is not the cause of the fault,
release selector lever:
1. Apply hand brake.
2. Disengage the cover from the centre
console and rota te it clockwise 90°.
3. Push ca tc h forward with a screwdriver
and move selector lever out of P.
4. Mount cover back on centre console and
refit.
Re-selecting P locks the selector lever
aga in. Have cause of power supply
interruption remedied. We recommend
that you consult your Vauxhall Authorised
Repairer.
To Next Page
Loading...
Need help?
General
