206
Ellipsoidal headlight system,
front indicator lights
1. Open bonnet and engage supp ort.
2. When replacing bulb s on the left-hand
side, open the cover of the fuse box. For
engine Z 13 DT
1)
, also pull the relay box
(located in front of the fuse box) up and
out of the guides.
When replacing bulbs on the right-hand
side, detach the air hose from the a ir
filter.
3. Rotate b ulb holder to left and
disengage.
4. Push b ulb into holder a little, rota te left
and remove.
5. Insert new bulb, without touching the
gla ss.
6. Engage holder into reflector by rotating
to the right.
7. After replacing b ulbs on the left-ha nd
side , c lose the cove r of the fus e box. F or
engine Z 13 DT
1)
, also position and
engage the relay box.
After replacing bulbs on the right-hand
side, rea ttac h the air hose to the air
filter and engag e.
El lipsoidal he adl ight s yste m,
main beam, parking lights
We recommend that you have bulbs
changed by your Vauxhall Authorised
Repairer.
1)
Sales designation – see page 234.
To Next Page
Loading...
Need help?
General
