22 3
To ensure proper operation of the rain
sensor 3, the se n so r a re a mu st be free fro m
dust, dirt and ice. The windscreen w ash
system must also be operated at regular
intervals and the sensor area must be de-
iced. Vehicles with rain sensor 3 ca n be
ide ntified by the sens or area ne ar the top
of the windscreen.
Wi per blad es on the wind sc reen
Lift wiper arm. Move relea se lever and
detach w ip er blade.
Wiper blade on the rear wind ow 3
Lift wiper arm. Disengage wiper blade as
show n in illustration a nd remove.
To Next Page
Loading...
