Disabled: IEEE802.1x is disabled.
Disconnected: IEEE802.1x is enabled but failed to be authenticated and access the
local network. (Possible cause: The account password or encryption method is
incorrect, please check the log of the authentication server for detailed information)
Connected: Successfully authenticated and connected to LAN.
2) If the terminal device is connected to a normal network instead of a network that
requires authentication, enabling the IEEE802.1x authentication function will not have
any impact.
3) Currently only supports MD5 and PEAP two encryption methods, and cannot be used
based on wireless network.
WIFI Settings
You will see the WIFI Settings sub-page only when the device is a WIFI model or connected
to a supported USB WIFI antenna on device boot.
1) Connect the USB WIFI antenna to the zero client, and power the zero client on.
2) Click the “WIFI” button to enter WIFI Settings page.
To Next Page
Loading...