Velodyne VLP-32C - Multiple Sensors Transmitting to a Specific Address; Figure J-3 Multiple Sensors - Improper Network Setup; Figure J-4 Multiple Sensors - Proper Network Setup

Figure J-3 Multiple Sensors - Improper Network Setup
J.2.3.2 Multiple Sensors Transmitting to a Specific Address
The solution is to configure each sensor on such a network to transmit their data to a non-broadcast address.
If every sensor in the same network transmits packets to a specific, non-broadcast, destination address (doesn’t have to
be the same one), as illustrated in Figure J-4 below , the other sensors will not suffer unnecessary network overhead.
Figure J-4 Multiple Sensors - Proper Network Setup
Appendix J • Network Configuration 135