Wave Server Installation Guide
Chapter 2
Before You Begin
CHAPTER CONTENTS
Installation roadmap
You must perform the tasks listed in the following table in the order specified. This list is only
an overview of the tasks you must perform. Detailed instructions for each task are presented in
the indicated chapters.
Important: All steps are required unless otherwise noted.
Installation roadmap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Site preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Safety requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Step Description See
1
Read the Release Notes for important late-breaking information
about this version of Wave ISM, including installation tips, known
issues and workarounds.
Documentation
CD included
with Wave ISM
2
Prepare the site where the Wave Server will be installed. This chapter
3
Install the Wave Server. Tasks include mounting and grounding
procedures; connecting the Wave Server to power and to your
LAN; connecting to your service provider’s voice or data trunks;
connecting digital and analog phones; installing and connecting
expansion components if you are using them; and connecting a
music-on-hold (MOH) system and/or paging system.
Chapter 3
(Wave IP 500)
or
Chapter 4
(Wave IP 2500)
To Next Page
Loading...
