Safety requirements 2-7
Chapter 2: Before You Begin
Wave Server Installation Guide
Proper lifting
Caution: Lift the Wave Server (and any EXUs, if you are using a Wave IP 2500) with
assistance whenever possible to prevent possible injury to yourself or damage to the system. See
“Physical specifications” on page 2-4 for weight specifications.
To safely lift the Wave Server from the ground:
1. Position your feet at shoulder width.
2. Keep your back straight.
3. Bend at your hips and knees.
4. Grasp the Wave Server by opposite corners, and position your body so the weight is
centered over your feet.
5. Lift the chassis slowly with your leg muscles.
6. Avoid twisting motions.
7. Bend at your hips and knees to put the chassis down.
To Next Page
Loading...
