Wave Server Installation Guide
Chapter 5
Connecting to the Wave ISM from the
administrator PC
CHAPTER CONTENTS
Obtaining all required HotFixes
Important: Although you will not apply HotFixes until the next chapter, contact your Vertical
representative at this point to obtain any required HotFixes and other critical information. The
latest updates are available to authorized dealers on the V-Connect website
(http://vconnect.vertical.com.)
Once you have obtained the required HotFix CAB files from your Vertical representative, place
them in one of the following locations:
• On the hard drive of the administrator PC that you will use to administer Wave
• On a network share
• On a removable flash drive or CD/DVD drive.
See “Upgrading the Wave Server” in Chapter 23 in the Wave Global Administrator Guide for
more information about these options.
Important: If you plan to place the HotFix CAB files on the hard drive of the administrator
PC, be sure to do so before performing the steps in “Configuring the administrator PC” on
page 5-3, where you will change the IP address of the administrator PC. Once you change the
IP address of the administrator PC, that PC will be dedicated to communicating with the Wave
ISM and you will no longer be able to access your network or go out on the Internet from it to
retrieve the HotFix CAB files.
Obtaining all required HotFixes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Administrator PC requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Configuring the administrator PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Connecting to the Wave ISM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
To Next Page
Loading...