About the Wave IP 500 Server 3-2
Chapter 3: Setting Up the Wave IP 500 Server
Wave Server Installation Guide
About the Wave IP 500 Server
The Wave IP 500 Server consists of the following components. Each is described in the
following sections.
• Wave Server chassis components. See the next section.
• Power supply. See page 3-5.
• Expansion options, including expansion modules and the Media Resource Module
(MRM). See page 3-6.
Important: Note that a monitor, keyboard, and mouse are not included with and are not
supported on the Wave Server. You use the administrator PC, described in Chapter 5, to
configure and manage the Wave ISM.
Maximum phone capacity
The Wave IP 500 Server supports the following:
• A maximum of 50 analog, digital, and SIP phones in a mixed configuration.
• A maximum of 50 SIP phones in a SIP-only configuration (with no digital or analog
phones)
• A maximum of up to 48 digital phones in a digital-only configuration (with no SIP
endpoints or analog phones)
To Next Page
Loading...
