Adding Wave ISM user and administrator accounts 7-23
Chapter 7: Initial Configuration
Wave Server Installation Guide
3. Choose Enterprise from the Access Level drop-down list.
4. Enter a
User Name. The user name can be up to 20 characters long, and can contain any
combination of alphanumeric characters, exclamation points (!), underscores (_), and
dashes (-). Note that the first character cannot be a numeral.
5. Enter the user’s
Full Name. The full name can be up to 32 characters long and can use any
combination of characters, including spaces.
6. Enter a
Password and confirm it in the appropriate fields. The password can be up to 14
characters long and can use any combination of characters except spaces.
7. Click
OK to close the dialog. The new user is now listed in the Password Administration
dialog.
8. Repeat steps 2 through 7 to create additional user accounts. (For accounts with lower
levels of access privileges, choose
Manager or User—instead of Enterprise—from the
Access Level drop-down list.)
9. Click
Done to return to the Management Console.
10. To secure your Wave ISM, log off and log on again with your new enterprise-level user
name and password. Test the new account to make sure it is working correctly. Then, start
the Password Administration applet again, and delete the default GlobalAdministrator
account.
Creating Wave ISM administrator accounts on the primary domain controller
If your phone system installation includes multiple Wave ISMs, and you have multiple
administrators, you may find it convenient to add your Wave ISMs to your Microsoft Windows
primary domain controller (PDC). You can then create Wave ISM administrator accounts on the
PDC, allowing centralized login authentication and Wave ISM administrator account
maintenance.
To create Wave ISM administrator accounts on the PDC:
1. On the primary domain controller, create global groups called VNI-Enterprise,
VNI-System, and VNI-Users.
2. Add accounts for your Wave administrators to these groups.
To Next Page
Loading...