Victory 2009 VISION User Manual

150
MAINTENANCE
Maintenance
Determine The Tightest Spot
11. Repeat the above deflection measurements with
the tire’s valve stem at the rear most position,
top, and front most positions (90 degrees
rotation each time), recording each
measurement.
12. If the tightest measurement is not within the
range specified below, belt tension must be
adjusted.
Belt Deflection (Tension): 32mm ± .5mm
Fig. 4
90°
90°
90°
Valve Stem
Rear Wheel
8maintenance.fm Page 150 Wednesday, April 16, 2008 1:59 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches