Victory 2009 VISION User Manual

166
MAINTENANCE
Maintenance
Front Brake Lever
The front brake lever reach (distance to the
handlebar) see page 72.
1. Squeeze the brake lever until firm and release it.
The lever should move smoothly without binding
and return smoothly to the rest position.
2. Lubricate the pivot bushing with VICTORY All
Purpose Grease (P/N 2872187) or a light spray
lubricant at regular intervals in accordance with
the Periodic Maintenance Table on page 134.
3. Check brake pads as outlined on page 96.
Check the amount of front brake lever
movement before it develops firm resistance. It
should not move more than 3/4 inch (19 mm)
inch before lever is firm. If movement is
excessive, contact you VICTORY dealer for
service.
Brake Lever Bushing
Max 3/4 in. (19mm)
visionownersmanual.book Page 166 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches