Victory 2009 VISION User Manual

167
MAINTENANCE
Maintenance
Rear Brake Pedal
Check the amount of rear brake pedal movement
before it develops firm resistance. It should not
move more than 3/8 inch (8mm) before pedal is firm.
If pedal movement is excessive, contact your
VICTORY dealer for service.
Lubricate the rear brake pedal pivot bushing with
VICTORY All Purpose Grease (P/N 2872187) or a
light spray lubricant at regular intervals in
accordance with the Periodic Maintenance Table on
page 136.
Check brake pads for wear as outlined on page 96.
Max 3/8 in. (8 mm)
visionownersmanual.book Page 167 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches