Victory 2009 VISION User Manual

51
INSTRUMENTS, FEATURES, & CONTROLS
Controls
Indicator Lamp Display
The indicator lamps are located on the upper
display in the center of the instrument panel.
See the following pages for a description of
each and its function.
Information Display
The information display, located below the
indicator lamp display, is a multi-function LCD
unit. This panel will display time, gear position,
ambient temperature, mileage (either trip or
total vehicle mileage), fuel range, average
MPG, current fuel economy, trip time, and other trip information. Use the MODE button
(page 62) to toggle through the feature. Each feature is described in more detail in this
chapter. See page 54 to change the unit display (U.S. to Metric).
NOTE:
If “Err” displays while toggling through the features, a system error has been logged. See
“Check Engine” indicator information on page 59.
Indicator Lamp Display
Information Display
visionownersmanual.book Page 51 Wednesday, February 13, 2008 4:31 PM

Victory 2009 VISION Specifications

General

Year	2009
Manufacturer	Victory
Model	VISION
Category	Touring
Compression Ratio	9.4:1
Cooling System	Air / oil
Transmission	6-speed
Final Drive	Belt
Front Tire	130/70-R18
Rear Tire	180/60-R16
Engine Type	V-twin, four-stroke
Displacement	1731 cc
Bore x Stroke	101 x 108 mm
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Rear Suspension	Single
Front Brakes	Dual 300mm discs, 4-piston calipers
Rear Brakes	Single 300mm disc 2 piston caliper
Seat Height	26.5 inches
Fuel Capacity	22.7 liters / 6.0 US gallons
Wheelbase	65.7 inches