Vigilant MX1 - Network Warning Status

Document: LT0344 Vigilant MX1 Operator Manual
Issue 2.4 8 August 2017 Page 9-11
The <fault status> is one of the following:
Normal
There are no network faults present.
Fault
There are 1 or more network faults present.
The <points status> is one of the following:
Normal
There are no network faults present.
Fault
One or more network faults present.
Disabled
The point has been disabled.
Refer to the user manual for the specific remote device for further details.
The format of the Network Warning Status display is shown in Figure
9-13.
Fig 9-13 – Warning Status
The <warning status> is one of the following:
Normal
There are no network warnings present.
Fault
There are 1 or more warnings present.
The <points status> is one of the following:
Normal
The warning status is Normal.
Fault
One or more warnings are present.
Disabled
The point has been disabled.
Refer to the user manual for the specific remote device for further details.
Network Warning Status
<point> <SID>
|
ENTER
PREV
Warning Status:<warning status>|
NEXT
<point status> |
DETAIL
<site name> |