Visionix vx65 - Transport, Storage, and Handling; Precautions During Use

Safety
VX65 User Guide
7 / 86
Transport, Storage, and Handling
Important!
Transport the VX65 in its specially designed case.
Make sure the unit is packed firmly and securely.
Do not subject the VX65 to strong vibrations. Shocks or violent movements can cause
malfunctions.
Transport Conditions
Temperature
-40°C to +70°C
Hygrometry
10 to 95%
Air Pressure
500 to 1060 HPa
Storage Conditions
Temperature
-10°C to +55°C
Hygrometry
10 to 95°C
Air Pressure
800 to 1060 HPa
Operating Conditions
Temperature
+10°C to +35°C
Hygrometry
30 to 90%
Air Pressure
800 to 1060 HPa
Precautions during use
Important!
Do not place or use the VX65 in direct sunlight.
Do not expose the VX65 to excessive dust or humidity.
Do not place the VX65 in a hot air current (e.g. above a heater).
Keep the tablet screen surface clean. Protect it from dust, fingerprints, and shocks.
When you switch off the VX65, wait at least 5 seconds before switching it on again.
WARNING:
Use of this equipment adjacent to or stacked with other equipment should be avoided
because it could result in improper operation. If such use is necessary, this equipment and
the other equipment should be observed to verify that they are operating normally.
WARNING:
Use of accessories, transducers and cables other than those specified or provided by the
manufacturer of this equipment could result in increased electromagnetic emissions or
decreased electromagnetic immunity of this equipment and result in improper operation.
WARNING:
Portable RF communications equipment (including peripherals such as antenna cables and
external antennas) should be used no closer than 30 cm (12 inches) to any part of the VX65,
including cables specified by the manufacturer. Otherwise, degradation of the performance of
this equipment could result.